Jump Links
The Hot Work License NYC form is an essential document for individuals seeking to operate gas torches in various applications, particularly in construction and maintenance settings. This form is associated with the Certificate of Fitness for Torch Use of Flammable Gases (G-60), which ensures that operators are adequately trained and knowledgeable about safety procedures. The application process requires candidates to meet specific qualifications, including a minimum age of 18, a basic understanding of English, and a letter of recommendation from an employer. Additionally, applicants must provide two forms of identification and pay a fee, which varies depending on whether it is an original application or a renewal. The examination itself consists of multiple-choice questions that assess understanding of crucial safety measures, equipment operation, and regulations related to gas torch use. Study materials provided by the New York City Fire Department cover a wide range of topics, including gas torch equipment, operational procedures, and the handling of compressed gas containers. Candidates must familiarize themselves with these materials and relevant fire codes to succeed in the examination and ensure safe practices in their work environments.
Similar forms
The Hot Work License NYC form is essential for individuals engaged in activities that involve the use of flammable gases. Several other documents share similarities with this license, primarily concerning safety, compliance, and training requirements in various work environments. Below is a list of nine documents that are similar to the Hot Work License NYC form:
- Fire Watch Certification: This document certifies that an individual is trained to monitor hot work operations for potential fire hazards, similar to how the Hot Work License ensures safety during gas torch use.
- Welding Certification: This certification verifies that a person is qualified to perform welding tasks safely, which often involves similar risks and safety protocols as hot work operations.
- OSHA 10-Hour Safety Training: This training program provides workers with basic safety and health information, paralleling the safety training required for obtaining a Hot Work License.
- Confined Space Entry Permit: This permit is necessary for work in confined spaces where hazards may exist, much like the precautions taken during hot work to prevent accidents.
- Hazardous Materials Handling Certificate: This document ensures that individuals are trained in handling hazardous materials safely, akin to the safety measures outlined in the Hot Work License.
- Scaffold Safety Training: This training focuses on the safe use of scaffolding, which is relevant for hot work operations that may occur at heights.
- Emergency Response Plan (ERP): An ERP outlines procedures for responding to emergencies, similar to the safety protocols associated with hot work activities.
- Personal Protective Equipment (PPE) Training: This training ensures that workers understand how to use PPE effectively, much like the personal protection guidelines in the Hot Work License.
- Electrical Safety Certification: This certification covers safe practices when working with electrical equipment, which can be relevant during hot work involving gas torches.
Form Preview
FIRE DEPARTMENT ● CITY OF NEW YORK
STUDY MATERIAL FOR THE
CERTIFICATE OF FITNESS EXAMINATION FOR
TORCH USE OF FLAMMABLE GASES
(old
Note: This
©05/2011 New York City Fire Department - All rights reserved ®
|
|
TABLE OF CONTENT |
|
NOTICE OF EXAMINATION |
I |
||
STUDY MATERIAL AND TEST DECRIPTION |
II |
||
INTRODUCTION |
1 |
||
DEFINITIONS |
6 |
||
PART 1. GAS TORCH EQUIPMENT |
7 |
||
1.1 |
Blowtorch |
7 |
|
1.1.1 Blowtorch |
7 |
||
1.1.2 |
8 |
||
1.2 |
Different Use of Gas Torches |
9 |
|
1.2.1 |
Welding and cutting |
9 |
|
1.2.2 |
Brazing and Soldering |
10 |
|
1.2.3 Other heavy duty application |
10 |
||
PART 2. TORCH (HOT WORK) OPERATION |
12 |
||
2.1 |
Responsible Person and |
13 |
|
2.2 |
Designated Hot Work Area |
14 |
|
2.3 |
Fire Watch |
17 |
|
2.3.1 Special Regulations of Fire Watch in the |
18 |
||
2.4 |
Personal Protection |
18 |
|
2.5 |
Gas Torch Operation Precautions |
20 |
|
2.6 |
Guidelines for Using an |
21 |
|
2.6.1 Set Up an |
21 |
||
2.6.2 Turn On an |
22 |
||
2.6.3 Turn Off an |
22 |
||
2.6.4 Special Precautions for Using |
22 |
||
2.7 |
General Guidelines for Using a Blowtorch |
23 |
|
2.7.1 Set Up a Blowtorch |
23 |
||
2.7.2 Turn On a Blowtorch |
23 |
||
2.7.3 Turn Off a Blowtorch |
23 |
||
2.8 |
Common Problems Occur With Torch Operations |
24 |
|
2.8.1 |
Backfire |
24 |
|
2.8.2 |
Flashback |
24 |
|
2.8.3 |
Check for Leaks |
24 |
|
PART 3. COMPRESSED GAS CONTAINER |
26 |
||
3.1 |
Handling, Use, and Storage of Compressed Gas |
26 |
|
3.1.1 |
General Guidance |
26 |
|
3.1.2 |
Related Equipment |
27 |
|
3.1.3 Moving Compressed Gas Containers |
29 |
||
3.1.4 |
Storing Containers |
30 |
|
3.2 |
Handling and Use of Acetylene Gas |
31 |
|
A
PART 4. PORTABLE FIRE EXTINGUISHERS |
32 |
|
4.1 |
Operation Instructions for a Fire Extinguisher |
33 |
4.2 |
Fire Extinguishers |
34 |
4.3 |
Typical Fire Extinguishers |
35 |
4.4 |
Fire Extinguisher Inspections |
35 |
B
|
NOTICE OF EXAMINATION |
Title: |
Examination for Certificate of Fitness for Torch Use of Flammable |
|
Gases |
Date of Test: |
Written tests are conducted Monday through Friday (except legal |
|
holidays) 8:00 AM to 2:30 PM. |
|
QUALIFICATION REQUIREMENTS |
1.Applicants must be at least 18 years of age.
2.Applicants must have a reasonable understanding of the English language.
3.Applicants must present a letter of recommendation from his/her employer. The letter must be on official letterhead, and must state the applicant’s full name, character, physical conditions, experience, and address of premises where applicant will be employed.
4.Applicants must present two (2) forms of satisfactory identification i.e., driver’s license, passport, vehicle registration, library card, or equivalent.
APPLICATION INFORMATION
Application Fees: $25.00 for originals and $15.00 for renewals. The fee may
be paid by credit card (no debit), in cash, money order, or personal check payable to New York City Fire Department. The $25.00 fee must be payable by all applicants prior to taking the Certificate of Fitness test. Application forms are available at the Public Certification Unit, 1st floor, 9 Metro Tech Center, Brooklyn, NY 11201.
TEST INFORMATION
Test:The test will be of the written, multiple choice type. A passing score of at least 70% is required in order to secure a Certificate of Fitness. Call
I
STUDY MATERIAL AND TEST DECRIPTION
About the Study Material
This study material will help you prepare for the examination for the Certificate of Fitness for torch use of flammable gases. The study material includes information taken from the Fire Prevention Code of the Bureau of Fire Prevention. This study material consists of 4 parts. The exam covers the entire booklet and any tables. It will not be provided to you during the test. It is critical that you read and understand this booklet to help increase your chance of passing this exam. The study material does not contain all of the information you need to know to work with a torch. It is your responsibility to become familiar with all applicable rules and regulations of the City of New York, even if they are not covered in this study material. You need to be familiar with the National Fire Protection Association (NFPA) 51B, and Fire Code Chapter 26, Chapter 35, and Chapter 38 which regulate the torch use of flammable gases in order to adequately prepare for the exam.
About the Test
All questions on the Certificate of Fitness examination are of the multiple choice type with four alternative answers to each question. Only one answer is most correct for each question. If you do not answer a question, or if you mark more than one alternative your answer will be scored as incorrect. A score of 70% is required on the examination in order to qualify for the Certificate of Fitness. Read each question carefully before marking your answer. There is no penalty for guessing.
Sample Questions
1.Who was the first President of the United States?
(A)George Jefferson.
(B)George Washington
(C)Bill Clinton.
(D)Barack H. Obama.
The correct answer is "B". You would press "B" on your computer terminal.
2.The city in the United States referred to as The Big Apple is:
(A)Los Angeles.
(B)Buffalo.
(C)Florida.
(D)New York.
The correct answer is "D". You would press "D" on your computer terminal.
II
INTRODUCTION
This document outlines New York City Fire Department regulations for welding, cutting and other torch and hot work operations and equipment. Hot work processes are a necessary part of much construction work and industrial work. However, the improper use is often a major cause of fire and it can result in loss of life and property.
Certificate of Fitness
According with the FDNY regulations, a
1.An
Torch operations using oxygen container and piped natural gas for jewelry manufacture may be performed by a person without a C of F, but must be under the personal supervision of a Certificate of Fitness holder. The Certificate of Fitness holder must regulate the pressure and flow of oxygen and natural gas to each torch.
However, if the torch operator for jewelry manufacture involves any oxygen with any fuel gas containers, the operator must be a C of F holder.
2.Any torch operation for
The Certificate of Fitness holder must keep the Certificates of Fitness upon his or her person or otherwise readily available for inspection by any representative of the Department, at all times while conducting or supervising the material, operation or facility for which the certificate is required.
Hot Work Permit
Permits issued by the FDNY are required to conduct the following hot work :
(1)storing, using or handling oxygen and a flammable gas, or
(2)storing, using or handling any flammable gas (e.g. LPG or CNG or acetylene) in excess of 400 SCF.
or
(3)storing, using or handling any oxidizing gas (e.g. oxygen) in excess of 504 SCF.
For LPG, 400 SCF is approximately 47 lbs. The following table lists the number of LPG containers for the storage, use, handling or transportation, requiring a permit. This permit will be issued by the Fire Commissioner after the location has been inspected and approved as acceptable for such practices.
LPG Container Capacity |
Number of Containers Requiring Permit |
14.1 oz |
54 |
16.4 oz |
46 |
20 lbs |
3 |
33.5 lbs |
2 |
40 lbs |
2 |
100 lbs |
1 |
Portable LPG containers that are more than 16.4 oz must not stored, handled, or used indoors in the following occupancies (as defined in the Building code): residential occupancies, factory and industrial occupancies; educational occupancies; institutional occupancies, except as the commissioner may authorize by rule.
1
Example of LPG container with a capacity of 20 lbs
Example of LPG container with a capacity of 100 lbs
Types of FDNY Permits
(1)
Such permit authorizes the permit holder to store, handle, or use flammable gases, or conduct a torch operation at a specific premises or location. A
Example of a permanent FDNY permit
2
Example of a temporary FDNY permit
This temporary permit is valid for 7 months.
(2) Citywide permit
A
Permits for Citywide Hot Work Operations
1.Each vehicle used to transport torches and containers of oxygen and flammable gas for use in citywide hot work operations must be inspected by a Department representative at the Bureau of Fire Prevention’s hazardous cargo vehicle inspection facility prior to the issuances of a permit for citywide hot work operations.
2.A
3.A separate permit must be applied for the storage of oxygen or flammable gas at a work site.
3
All permits are not transferable, and any change in occupancy, operation, tenancy or ownership requires that a new permit be issued. The Certificate of Fitness holder is responsible for making sure that all fire safety regulations and procedures are obeyed on the premises. Permits shall be readily available on the premise for inspection by Fire
Department representatives.
Hot Work Authorization (Hot Work Program Permit)
A hot work program authorization bearing the signature of the responsible person must be obtained for any project conducted on a premises involving hot work operations by the person in charge of such hot work operations. Hot work authorization should be issued by the responsible person and it must be available for inspection by any representative of the department during the performance of the work, and for 48 hours after the work is complete. An example of a hot work program permit is shown below.
The operation of gas torches is required to comply with the following FDNY code and rule sections:
Welding and Other Hot Work: [FC Chapter 26]
Flammable Gases: : [FC Chapter 35]
Liquefied petroleum gases: [FC Chapter 38]
Fire Prevention During Welding, Cutting and Other Hot Work: [NFPA 51B, 2003 edition]
Portable Space Heaters Fueled By Piped Natural Gas at Construction Sites [Rule
Use of Oxygen and a Flammable Gas in Citywide Hot Work Operations [Rule 2605- 01]
Piped Natural Gas and Oxygen Consuming Devices and Installations [Rule
Acetylene [Rule
Compressed Natural Gas [Rule
Liquefied Petroleum Gases [Rule
4
HOT WORK AUTHORIZATION PERMIT
Note: This authorization applies only to this job, and in the area specified during the date and time noted.
GENERAL INFORMATION
|
Hot Work Performed By: |
Employee |
Contractor |
| |
Authorization # |
||
|
|
|
|
|
|
|
|
|
Employee / |
|
|
|
Contractors Name: |
|
|
|
|
|
|
|
|
|
|
|
Supervisor / Foreman Name: |
|
|
|
Supervisor / Foreman - |
||
|
|
|
|
|
|
||
|
Location: Building address, room # and/or area of work . |
|
Permit Start Date: ________________ Permit Start Time: ______________ |
||||
|
|
|
|
|
|||
___________________________________________________________ |
Permit Stop Date: ________________ Permit Stop Time: ______________ |
||||||
___________________________________________________________ |
Comments: ___________________________________________________ |
||||||
___________________________________________________________ |
_____________________________________________ |
|
|||||
|
|
|
|
|
|
|
|
HOT WORK ACTIVITY
ARC WELDING
SOLDERING
GRINDING
BRAZING
USING OXYGEN AND A FLAMMABLE GAS (FDNY PERMIT)
MAPP WELDING
WELDING
CUTTING
OTHER:___________________________________
All hot work activities must be conducted by FDNY Certificate of Fitness holders. Certificate holders shall be responsible for keeping such certificate upon his/her person or otherwise readily available for inspection.
Torch Operator:
Certificate #:
Exp Date:
Fire Guard:
Certificate #:
Exp Date:
ACCEPTANCE BY THE RESPONSIBLE PERSON FOR HOT WORK
I certify that all applicable codes, procedures, regulations, rules,
Name:
______________________________________________
Employee |
Contractor |
Signature:
______________________________________________
Date:
DESIGNATED TO AUTHORIZE THE PERFORMANCE OF HOT WORK
Name:
Signature:
Time:
Date:
Fire alarm precautions taken |
YES |
N/A Type: ________________________ |
______________________________________________________________________
YES |
FDNY permit required to conduct hot work?
YES |
N/A |
This authorization shall be available for inspection by any representative of the fire department during the performance of the work and for 48 hours after the work is complete.
5
Common mistakes
Filling out the Hot Work License NYC form can be straightforward, but several common mistakes can hinder the process. One frequent error is not providing a letter of recommendation from an employer. This letter must be on official letterhead and detail the applicant's experience and physical condition. Without it, the application may be rejected.
Another mistake involves identification. Applicants must submit two forms of satisfactory ID, such as a driver’s license or passport. Failing to include these documents can delay the application or lead to denial. It's essential to ensure that the IDs are current and valid.
Many people also overlook the application fee. The fee for an original application is $25, and it must be paid before taking the test. Applicants often forget to bring cash or a money order, leading to unnecessary delays. Credit cards are accepted, but debit cards are not.
Inaccurate completion of the application form is a common issue. Applicants should carefully read each section and provide accurate information. Errors in personal details, such as name or address, can result in complications during processing.
Some individuals fail to meet the age requirement. Applicants must be at least 18 years old. If this requirement is not met, the application will not be processed. It's crucial to verify age before applying.
Understanding the English language is another qualification requirement. Applicants who do not have a reasonable understanding may struggle during the test. This can lead to poor performance and failure to pass the examination.
Additionally, applicants sometimes neglect to study the provided materials. The study material is designed to prepare candidates for the test. Ignoring this resource can result in a lack of knowledge about crucial topics, ultimately affecting test scores.
Marking more than one answer on the multiple-choice questions is a common mistake. If an applicant selects multiple options, that question will be scored as incorrect. It's vital to read each question carefully and choose only one answer.
Some applicants may also underestimate the importance of the fire watch. Understanding the role of a fire watch during hot work operations is essential. Neglecting this aspect can lead to safety violations and jeopardize the application.
Finally, failing to prepare for potential problems during torch operations can be detrimental. Knowledge of issues like backfire and flashback is crucial for safe operation. Applicants should familiarize themselves with these common problems to ensure safety and compliance.
More About Hot Work License Nyc
-
What is the purpose of the Hot Work License NYC form?
The Hot Work License NYC form is designed to ensure that individuals who use flammable gases for torch work are qualified and knowledgeable about the safety protocols and regulations. It is essential for preventing fire hazards and ensuring safe operations in various environments, particularly in construction and manufacturing settings.
-
Who needs to apply for a Hot Work License?
Any individual who intends to operate a torch using flammable gases in New York City must apply for a Hot Work License. This includes workers involved in welding, cutting, brazing, and soldering tasks. Applicants must be at least 18 years old and possess a reasonable understanding of the English language.
-
What are the requirements for obtaining a Hot Work License?
To obtain a Hot Work License, applicants must meet several requirements:
- Be at least 18 years of age.
- Have a reasonable understanding of the English language.
- Present a letter of recommendation from an employer, detailing the applicant’s qualifications and the address where they will work.
- Provide two forms of identification, such as a driver's license or passport.
-
What is the application fee for the Hot Work License?
The application fee is $25.00 for new applicants and $15.00 for renewals. Payments can be made via credit card (no debit), cash, money order, or personal check made out to the New York City Fire Department. It is important to pay this fee prior to taking the Certificate of Fitness test.
-
How is the examination for the Hot Work License structured?
The examination consists of multiple-choice questions, with each question having four possible answers. A passing score of at least 70% is required to secure the Certificate of Fitness. It is crucial to read each question carefully and choose the most correct answer. There is no penalty for guessing.
-
Where can I find the study material for the Hot Work License examination?
The study material is available to help applicants prepare for the examination. It covers various aspects of torch use, safety protocols, and relevant fire codes. It is advisable to familiarize yourself with the entire booklet and any related regulations, including the National Fire Protection Association (NFPA) guidelines, as these will not be provided during the test.
Misconceptions
Understanding the Hot Work License NYC form is crucial for anyone involved in torch use of flammable gases. However, several misconceptions can lead to confusion. Here are five common misunderstandings:
- The Hot Work License is only for welding. Many believe that this license is solely for welding activities. In reality, it covers a range of torch uses, including brazing, soldering, and other heavy-duty applications.
- All torch users need the same certification. Some think that one certification fits all. However, there are specific licenses for different applications, such as the G-60 for general torch use and the G-61 for jewelry manufacturing.
- Taking the exam guarantees a license. A common misconception is that passing the exam automatically results in a license. While a passing score of 70% is required, applicants must also meet other qualifications, such as age and identification requirements.
- Study materials provide all necessary information. Many assume that the study material contains everything needed to pass the exam. It's important to note that applicants are responsible for understanding all applicable rules and regulations beyond what is provided in the study material.
- Application fees are refundable. Some individuals believe that if they do not pass the exam, their application fees will be returned. In fact, the fees are non-refundable regardless of the exam outcome.
By clarifying these misconceptions, individuals can better prepare for the requirements and responsibilities associated with the Hot Work License in New York City.
Fill out More Forms
How to Dissolve a Corporation in Ny - All parties involved must be notified of the motion to maintain transparency in the process.
Loan on Line - Keep a copy of your completed NYCERS 380 form for your records after submission.
Step Parent Adoption Forms - The New York Adoption Form is essential for prospective parents wishing to adopt.
Key takeaways
Filling out and using the Hot Work License NYC form is an important process for those engaged in torch use of flammable gases. Here are some key takeaways to keep in mind:
- Age Requirement: Applicants must be at least 18 years old to qualify for the license.
- Language Proficiency: A reasonable understanding of the English language is necessary for all applicants.
- Employer Recommendation: A letter of recommendation from your employer is required. This letter should be on official letterhead and detail your qualifications.
- Identification: Two forms of identification must be presented, such as a driver’s license or passport.
- Application Fees: The fee for the original application is $25, while renewals cost $15. Payment methods include credit card, cash, money order, or personal check.
- Test Format: The examination consists of multiple-choice questions. A passing score of at least 70% is required to obtain the Certificate of Fitness.
- Study Material: Familiarize yourself with the provided study material, which covers essential information for the exam, including safety regulations.
- Preparation Responsibility: It’s crucial to understand all relevant rules and regulations, even those not included in the study material.
- Testing Schedule: Written tests are conducted Monday through Friday, excluding legal holidays, from 8:00 AM to 2:30 PM.
By keeping these points in mind, you can navigate the Hot Work License NYC form process more effectively and increase your chances of success.
Hot Work License Nyc: Usage Guide
Once you have gathered all the necessary information and documents, you can begin filling out the Hot Work License NYC form. This process will require you to provide specific details about yourself and your work environment. Make sure to double-check your entries for accuracy before submission.
- Obtain the Hot Work License NYC form from the Public Certification Unit or download it online.
- Fill in your full name in the designated section.
- Provide your date of birth and contact information, including your phone number and email address.
- Indicate your employer's name and address, ensuring it matches the information on the recommendation letter.
- Attach the letter of recommendation from your employer. Make sure it is on official letterhead and includes all required details.
- List two forms of identification, such as a driver's license and a passport, and include their numbers.
- Specify the type of work you will be doing that requires the Hot Work License.
- Pay the application fee of $25. You can use a credit card, cash, money order, or personal check made out to the New York City Fire Department.
- Review the completed form for any errors or missing information.
- Submit the form in person at the Public Certification Unit or as directed in the instructions provided.